Amplitude Energy has commenced drilling on the Nestor-1 exploration well offshore Victoria, Australia. Marking the final well of the company’s East Coast Supply Project (ECSP) drilling campaign, the Transocean Equinox rig initiated operations on November 18 in permit VIC/P76, located approximately 6 km (3.7 mi) southeast of the CHN pipeline tie-in point at Juliet.
The Nestor-1 target focuses on the Waarre C reservoir, holding an estimated gross mean prospective resource of 64.2 Bcf, with gross estimates spanning between 38.9 Bcf (P90) and 94.3 Bcf (P10). High Waarre C reservoir amplitudes and a distinct flat spot indicative of a gas-water contact at roughly 2,350 m true vertical depth subsea (TVDSS) support the prospect. Amplitude projects an 81% probability of geological success.
Operations are scheduled to take around 20 days to reach the target total depth of approximately 2,300 m (7,550 ft) TVDSS, depending on conditions. In the event of a discovery, Amplitude plans to immediately perform logging to evaluate reservoir quality and gas composition. Following evaluation, the well will be cased, completed with a subsea tree, cleaned up, and suspended for future ECSP development.
Amplitude operates the VIC/P76 permit with a 50% equity stake alongside joint venture partner O.G. Energy, which holds the remaining 50%.
